Copyright ©Dezhou Tianrui Machinery Equipment Co., Ltd. 鲁ICP备13027354号-2 Powered by www.300.cn
DEZHOU TIANRUI MECHANICAL EQUIPMENT CO., LTD
T2150
T2150x3m deep hole drilling machine
T2150 deep hole drilling machine
A), the basic process performance of the machine tool:
1 The machine can complete the drilling, boring, nesting and rolling of inner holes. During processing, the process of workpiece rotation, tool feeding, cutting fluid cooling through the oil dispenser (or boring bar) into the cutting area, lubrication, cooling the chip area, and wrapped chips to discharge chips forward.
2) When drilling, the chip removal process in BTA is adopted. When boring, the process of discharging cutting fluid and cutting chips forward (head end) is adopted.
3) Machining accuracy of the machine tool:
When drilling: hole diameter accuracy IT9-11. Surface roughness: Ra6.3.
During rough boring: hole diameter accuracy IT9-10. Surface roughness: Ra6.3. Zh
When fine boring: hole diameter accuracy IT8-9. Surface roughness: Ra3.2.
During rolling: Aperture accuracy IT8-9. Surface roughness: Ra0.4.
Straightness of processed hole: less than 0.15 / 1000.
The deviation of the outlet of the processing hole: less than 0.2 / 1000Processing efficiency of machine tools:
Cutting speed: determined according to the tool structure, material and workpiece material, generally 50-100m / min.
Feed speed: determined according to the processing conditions, generally 40-100mm / min.
Maximum machining allowance when boring: Determined according to the tool structure, material and workpiece conditions, generally not more than 30mm.
Machine parameters:
specifications |
Parameter |
T2150 |
|
Boring diameter range |
Φ250-Φ500mm |
Drilling diameter range |
Φ60-Φ120mm |
Processing depth range |
1-12m(1m per interval) |
Working clamping diameter range |
300-650mm |
Spindle center height |
625mm |
Headstock spindle diameter |
Φ130mm |
Taper hole at the front end of spindle |
140# 1:20 |
Spindle speed range and number of stages |
3.15-315r/min Level 21 |
Spindle bore of drill box (optional) |
75mm |
Taper hole at the front end of main shaft of drill pipe box (optional) |
Φ85mm,1:20 |
Speed range and number of stages of drill pipe main shaft (optional) |
80-350r/min Level 6 |
Feed speed range (stepless) |
5-1000mm/min |
Pallet fast moving speed |
2m/min |
Spindle motor |
N=30kw,n=960r/min |
Motor of drill pipe box (optional) |
N=22kw,n=1460r/min |
Hydraulic pump motor |
N=1.5,n=1440r/min |
Pallet fast motor |
N=3kw,n=2880r/min |
Feed motor |
N=5.5KW(AC servo) |
Cooling pump motor |
N=5.5KW,N=1460r/min(3groups) |
Cooling system rated working pressure |
0.36MP |
Cooling system flow |
300、600、900L/min |
Rated working pressure of hydraulic system |
2.5MPa |
Axial load of the oil feeder |
68KN |
Maximum tightening force of oil dispenser on workpiece |
20KN |